Reverse Engineering Electronic Wiring Board

Reverse Engineering Electronic Wiring Board need to strip off the copper pattern layer on it and scanning each one layer of it. After the scanning process done, we need to layout each one of them as one of the most critical part, proper Electronic PCB board layout design in the process of PCB reverse engineering can save you a lot of troubles:

1; use bigger Electronic wiring board can save the material, due to the bow & twist, weight issues, so it needs to use dedicated clamp and fixture during the transportation, as a result of that, engineer should avoid to use the panel with larger than 230mmX300mm. it is better to control all of the Electronic printed circuit board dimension within two or three kinds, which can also help to shorten the adjusted track, relocate the bar code reader position and similar items which can cause the suspension of Electronic wiring board assembly machine; furthermore, PCB board with less dimension types can help to decrease the wave soldering temperature curve quantity;

2; Contain different panelization design within the same Electronic wiring board could be a great design method; but this method also has the limitation of its own, because these circuit boards which have been panelized onto the same panel should have the same surface treatment requirement;

3; Provide some frames about the Electronic wiring board, especially when there is any electronic component on the edge of Electronic wiring board. Most of the automatically assemble facility will require to have at least 5mm distance to the frame;

Tags: pcb assemble replicate,pcb board replicate,pcb card replicate,pcb replicate,pcba replicate,printed circuit board replicate,printed wiring board replicate,pwb replicate,pwba replicate