PCB Circuit Card Reverse Engineering

PCB Circuit Card Reverse Engineering is a process to restore circuit scheme from original printed circuit board and then use these documents to re-manufacture the circuit board;

In order to fix these components, this is also a process which bring a lot of difficult when reverse engineering PCB board anti-noise measures, we need to solder their leads onto the board surface.

In the most basic single side PCB Circuit Card, all of the components will concentrate on one side, while the tracks are all concentrate on the other side.

If in that case, we need to drill the through hole on printed circuit board, through which these leads can go through the PCB Circuit Card and reach the other side. As a result of that, the component side will be called top side, and solder side will be called bottom side.

If there is any components on the PCB card cloning, like the triode or integrate circuit, they need to withdraw or insert in the process of Printed circuit board reverse engineering, these components must be installed onto the sockets.

Since these sockets are all soldered onto the board directly, and components can be disassemble willingly. Nowadays, there is a socket name Zero Insertion Force socket, it can let the components insert and withdraw into/from the socket effortlessly which grant great convenience.

Tags: replicate circuit board,replicate circuit card,replicate pcb,replicate pcb assemble,replicate pcb board,replicate pcb card,replicate pcba,replicate printed circuit board,replicate printed wiring board,replicate pwb,replicate pwba