Layout PCB Board Reverse Engineering Properly

How to Layout PCB Board Reverse Engineering Properly

Layout PCB Board Reverse Engineering is the critical process for the printed circuit board image design, most of the elements which have been considered should presented in this process, the copper track layout and the cross talks among the adhesive tracks on the PCB board can determine the anti-inteference of PCB board reverse engineering, so layout the pcb board properly can make the pcb reverse engineering acquire the best performance. In view of the anti-inteference of reverse engineering pcb board, layout should follow the below rules and technology:

1, as long as the layout requirement can be met, the single layer PCB board must be the first option for board reverse engineering, and then comes the double side, multilayer pcb board. And the density of pcb board tracks should be arrange by the consideration of comprehesive structure and electrical performance, to make sure the layout as simple, and even as possible; the tracks width and space shouldn’t less than 0.2mm in the permission of track density, increase the line width and space accordingly when reverse engineering pcb board;

2, the main signal wire in the pcb board should concentrate on the center of PCB Reverse Engineering, and close the ground line as much as possible, or use the grounding wire to surround it, the loop area form by signal line, signal revert line should keep to the minimum size; avoid to use the parallel layout when pcb board reverse engineering

Tags: pcb assemble reverse engineering,pcb board reverse engineering,pcb card reverse engineering,pcb reverse engineering,pcba reverse engineering,Printed Circuit Board Reverse Engineering,printed wiring board reverse engineering,pwb reverse engineering,pwba reverse engineering