Circuit PCB Reverse Engineering Layout

Circuit PCB Reverse Engineering can extract layout scheme from original circuit PCB, using the layout scheme can generate Gerber file which can be used for PCB card cloning;

After the completion of Circuit pcb duplication and component layout, it is time to start the layout of circuit pattern. The basic principle of Layout is: spare no effort to choose the layout design with the lowest density in the condition of assembly density allowance, at the same time, signal pattern layout must has the same width and space to facilitate the impedance matchment.

Regarding to radio frequency circuit, the unreasonable design of orientation, width and space of signal tracks, will probably cause the cross interference with signal transmitting lines; beside, there is noise interference embedded inside the systematic power supply itself, as a result of that, when copy Circuit PCBA must take the comprehensive consideration into account for reasonable layout.

When layout the circuit pattern, all of the layout circuit must keep at least two millimeters distance from the frame of Circuit PCB, to avoid the track break out or potentials of track breakout when manufacture Circuit pcb. power supply track must be as wide as possible from Circuit PCB Reverse engineering to reduce the cycle circuit resistance, at the same time,